- This article is about the roller coaster at Walygator Parc. For the roller coaster previously named Monster, see Monster Mouse (Quassy Amusement Park).
|Click here to watch the on-ride POV|
|The Monster while it was at Expoland.|
|Manufacturer||Bolliger & Mabillard|
|Designer / calculations||Ing.-Büro Stengel GmbH|
|Type||Steel - Inverted|
|Model / product||Inverted Coaster (Raptor)|
|Riders per train||32|
|Propulsion||Chain lift hill|
Top speed90 km/h
The Monster is a steel inverted roller coaster located at Walygator Parc in Maizières-les-Metz, Grand Est, France. It is the first Bolliger & Mabillard roller coaster and one of the largest in France. It opened on July 9, 2010, after numerous delays.
History[edit | edit source]
The ride first opened at Expoland in Suita, Osaka, Japan in 1996. The ride was named Orochi and was antiseismic (built to withstand earthquakes). Orochi and Expoland closed on November 12, 2007 following an accident on the park's Fujin Raijin II roller coaster, in which a women died. After standing but not operating for two years, the ride was bought by Walygator Parc.
Construction on the ride started in January/February 2010, later than scheduled due to harsh weather. Because of this, The Monster's inauguration on April 10, 2010 was delayed. A second inauguration was again delayed, as the TÜV did not approve the opening of the roller coaster in time. The Monster finally opened on July 9, 2010.
Design[edit | edit source]
Layout[edit | edit source]
After leaving the station, the ride begins with a left-hand turn into the 131.3 feet tall chain lift hill. At the top, the inverted train dips slightly before turning left ninety degrees as it drops 119 feet down the first hill. From the bottom the train immediately enters a vertical loop. Next is the zero-g roll, followed by the cobra roll, which inverts riders twice.
After the cobra roll, the train climbs through an upward spiral and enters a straight section, which previously housed the mid-course brake run. Next the train dives down to the right transitioning into a brief straight section of track. Riders then enter the first of two corkscrews which rotates the train 360° to the left. The track straightens briefly again before turning to the right and entering a short dip before taking riders into the second corkscrew (this portion of the ride is often referred to by enthusiasts as the "dip and flip"). The ride finishes with a helix before making one last left turn into the final brake run.
Trains[edit | edit source]
Comparison to Raptor[edit | edit source]
Monster is a clone of Raptor at Cedar Point. Many enthusiasts rate Monster higher than Raptor. Because the ride lacks the mid-course brake run its American counterpart has, it keeps the speed up in the second half of the ride. During its move to France, the brakes were removed as they are not required for one-train operation, saving money on maintenance.